After-sales Service: | Provide Replacement and Repair Services Due to Qu |
---|---|
Warranty: | 1 Year |
Condition: | New |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Smaraad 600/800W MPPT Wind and Solar Hybrid Charge Controller
Model | T1-WS-04-NNHN-1 | T2-WSII-06-NNHN-1 | ||
Battery parameters | ||||
Applied battery voltage | 12V | 24V | 24V | 48V |
Battery protect method | Reverso connoction protection (do not burn any components,with voice prompt); ovor voltage protection, under voltage protection (for street light and such kind of load) |
|||
Voltage at the over voltage protection point | 14.5V±0.1V | 29.0V±0.2V | 29.0V±0.2V | 58.0V±0.3V |
Voltage at the over voltage recovery point | 13.7V±0.1V | 27.5V±0.2V | 27.5V±0.2V | 55.0V±0.3V |
Voltage at the under voltage protection point | 10.5V±0.1V | 21.0V±0.2V | 21.0±0.2V | 42.0V±0.3V |
voltage at the under voltage recovery point | 11.5V±0.1V | 23.0V±0.2V | 23.0V±0.2V | 46.0V±0.3V |
Battery temperature compensation | 5mv/ºC/2V (settable)(optional component) | |||
Wind turbines input parameters | ||||
Rated power of applied Wind turbines | 400W 12V | 400W 24V | 600W 24V | 600W 48V |
Rated current of the terminal | 33A dc (after | 20A dc (after | 30A dc (after | 16A dc (after |
Max input current of the terminal | 40A dc (after | 25A dc (after | 40A dc (after | 20A dc (after |
The default speed of the Wind turbines | 500 Rpm(settable) (settable) |
|||
The default current of the Wind turbines | 33A (settable) | 20A (settable) | 30A(settable) | 16A (settable) |
Wind turbines protection method | Over rev protection, over curront protoction, induction lightening protoction | |||
Unloading method | PWM step-less high-frequency soft unloading (built-in) | |||
MPPT function | Boost MPPT model ( automatic tracking or 5 sogments curve tracking) | |||
lnput current of MPPT channel | 20A | 20A | 20A | 20A |
PV input parameters | ||||
Rated input current of applied PV | 200W/24V (standard) 600W/24V (Max optional) |
|||
Rated input current of terminal | 154(standard) 30A (optional) |
|||
Charging voltage drop | <0.2V | |||
PV protection methods | Reverse connoction protection (voice prompt) | |||
Unloading method | Open circuit unloading | |||
Discharge the output port parameters | ||||
output | 2 outputs | |||
current of each output | 12A | |||
output protection methods | Over current protection (15A/30sec.1840.4sec.). short-circuit protection (current > 150A) |
|||
output control methods | light control,time control, reverse output,PWM output (250HZ,only the 2nd output has it) | |||
others | ||||
Auxiliary function | Monitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with voice prompt) |
|||
Display mode | Liquid crystal (Lco) display | |||
communication mode | RS232(5v electrical level)/Rs485 (standard) Short-range wireless (optional) |
|||
Displayed parameters | Wind turbines input,voltagelcurrentpowerlgenerated,energyirevlunloading current,Battery voltagelcharging currentpower/total,charging capacityibattery status information,output curront/powor/abnormal information of the 2nd output port |
|||
Power consumption in standby mode(screen | About 20ma /24v system | |||
perating mode | 3M foil key operation (4 keys) | |||
Working temperature/ humidity range | -40~+80ºC/20~85%RH (non condensing) | |||
Protection grade | IP41 | |||
Controller size(LwH) | 175mm"148mm"84mm | |||
Net weight | 1.8kg |
Suppliers with verified business licenses