| After-sales Service: | Provide Replacement and Repair Services Due to Qu |
|---|---|
| Warranty: | 1 Year |
| Condition: | New |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
| Model | T2-WS-10-HHNH-1 | T4-WS-15-HHNH-1 | |
| Battery parameters | |||
| Appliled battery voltage | 24V | 48V | 48V |
| Battery protect method | Reverse connection protection (do not burn any components, with voico prompt); over voltago protection, under voltage protection (for street light and such kind of load |
||
| voltage at the over voltage protection polnt | 29.0V±0.2V | 58.0V±0.3V | 58.0V±0.3V |
| voltage at the over voltage recovery point | 27.5V±0.2V | 55.0V±0.3V | 55.0V±0.3V |
| voltage at the under voltage protection polnt | 21.0V±0.2V | 42.0V±0.3V | 42.0V±0.3V |
| voltage at the under voltage recovery polnt | 23.0V±40.2v | 46.0V±40.3V | 46.0V±0.3V |
| Battery temperature compensation | 5mv/ºC/2V(settable)(optional component) | ||
| wind turblInes input parameters | |||
| Rated power of appliled wind turbines | 1000W 24V | 1000W 48V | 1500W 48V |
| Rated current of the terminal | 40A dc (afer rectifcation) | 25A dc (after rectification) | 35A dc (ater rectification) |
| Max input current of the termina | 42A de (after rectifcation) | 30A dc (afterrectification) | 40A dc (ater rectification) |
| The defauit speed of the Wind turbines | 500 Rpm (settable) | ||
| The default current of the Wind turbines | 40A(settable) | 25A (settable) | 35A(settable) |
| Wind turbines protection method | Over rev protection, over current protection, induction lightening prctection | ||
| unloading method | PWM step-less high-frequency sot unloading (built-in) | ||
| MPPT Function | Boost MPPT model ( automatic tracking or 5 segments curve tracking) | ||
| input current or MPPT channe | 20A | 20A | 20A |
| PV input parameters | |||
| Raled lnput current of applled Pv | 200W/24V (standard) 1500W48V(Max optional) |
||
| Rated input current of terminal | 15A (standard) 36A(optional) |
||
| charging voltage drop | <0.2V | ||
| Pv protection methods | Reverse connection protection (voice prompt) | ||
| unloading method | Open circuit unloading | ||
| Discharge the output port parameters | |||
| ouput | 2 outputs | ||
| current of each outpu | 12A | ||
| output protection methods | Over current protection (15A30sec.18A0.4sDc.), short-circuit protection (current > 150A) |
||
| ouput control methods | light control,time control,reverse output,PWM output (250Hz,only the 2nd output has it) | ||
| others | |||
| Auxillary functlon | Monitor of air temperature inside contrcller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with vaice prompt) |
||
| Display mode | Liquid crystal (LCD) display | ||
| communication mode | RS232(5V electrical level)/Rs485 (standard) Short-range wireless (optional |
||
| Displayed parameters | Wind turbinesinput yvoltagelcurrentpowergenerated,energyrevlunloadng current,Battery voltagelcharging currentpoworhtotalcharging capacitylbattery status infomation, output curentpowerlabnormal information of the 2nd output port |
||
| Power consumption in standby mode(screenl backlight closed) | About 20ma 24 system | ||
| operating mode | 3M foil key operation (4 keys) | ||
| Working temperature humidity range | -40~+80ºC/20~85%RH (non condensing) | ||
| Protection grade | IP41 | ||
| controller size (LwH) | 235mm*148mm '84mm | ||
| Net weight | 2.4kg | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}